Polycom DOC2560A manual Click Save & Continue, 2-37

Polycom RMX 1500/2000/4000 Getting Started Guide

With dial-in connections, the MCU CLI indicates the MCU’s number dialed by the participant. In a dial-out connection, indicates the MCU (CLI) number as seen by the participant.

28Click Save & Continue.

After clicking Save & Continue, you cannot use the Back button to return to previous configuration dialog boxes.

The ISDN/PSTN Network Service is created and is added to the ISDN/ PSTN Network Services list.

If the system cannot create the ISDN/PSTN Network Service, an error message is displayed indicating the cause and allowing you access the appropriate dialog box in the Fast Configuration Wizard for corrective action.

29Click OK to continue the configuration.

The Spans dialog box opens displaying the following read-only fields:

Attached

Spans

Spans

Table

—ID – the connector on the RTM ISDN card (PRI1 to PRI12).

2-37