Polycom DOC2560A manual 2-44, Entity, Description, Name

Chapter 2-First Time Installation and Configuration

Table 2-14Conferencing Entities (Continued)

Entity	Description
Entry Queue	Name	ID
	DefaultEQ	1000
	Using an Entry Queue enables one dial-in number to be
	used for all conferences. In the Entry Queue, participants
	are prompted for information to enable routing to their
	destination conferences.
	A default Entry Queue called DefaultEQ is provided.
	The default Entry Queue is also set to Ad Hoc
	conferencing which allows participants to start new
	conferences without prior definition by entering a
	Conference or Meeting Room ID that is not used by any
	on going conference currently running on the MCU. It
	uses an Entry Queue IVR Service called Entry Queue IVR
	Service.
	The default Welcome Slide displayed at the participants
	endpoint upon connection to the Entry Queue and lists the
	default Meeting Rooms. The participant can select one of
	these Meeting Rooms or enter another ID to start a new
	conference.
	If no Transit Entry Queue is defined, DefaultEQ is the
	default Transit Entry Queue. For more information see the
	RMX 1500/2000/4000 Administrator’s Guide, ”Transit
	Entry Queue” on page 4-9.
	Note: An ISDN/PSTN dial-in number is not assigned to
	the Entry Queue as the number depends on the dial-in
	numbers range defined in the Network Service. It must be
	manually assigned to enable ISDN or PSTN participant
	connections to this Entry Queue. For more information,
	see the RMX 1500/2000/4000 Administrator’s Guide,
	”ISDN/PSTN Network Services” on page 13-46.
Entry Queue IVR	Name: Entry Queue IVR Service
Service	Includes all the voice messages and video slides used to
	guide participants though their connection process to the
	MCU and route them to their destination conference.
	Entry Queue IVR Service is the default Entry Queue IVR
	Service provided for the default Entry Queue.

2-44