Polycom DOC2560A manual 2-35, Define the following parameters, Click Next, Field, Description

Polycom RMX 1500/2000/4000 Getting Started Guide

21Define the following parameters:

Table 2-11Fast Configuration Wizard – Spans Definition

Field	Description
Framing	Select the Framing format used by the carrier for
	the network interface from the list.
	• For T1 spans, default is SFSF.
	• For E1 spans, default is FEBE.
Side	Select one of the following options:
	•	User side (default)
	•	Network side
	•	Symmetric side
	Note: If the PBX is configured on the network side,
	then the RMX unit must be configured as the user
	side, and vice versa, or both must be configured
	symmetrically.
Line Coding	Select the PRI line coding method from the list.
	• For T1 spans, default is B8ZS.
	• For E1 spans, default is HDB3.
Switch Type	Select the brand and revision level of switch
	equipment installed in the service provider’s central
	office.
	• For T1 spans, default is AT&T 4ESS.
	• For E1 spans, default is EURO ISDN.

22Click Next.

2-35