Precor 5.37 manual Relationship between CrossRamp setting and degree of incline

CROSSRAMP: Press and hold the CROSSRAMP arrow keys to increase or decrease the ramp incline from 1 to 20.

Changes to the ramp incline are not immediate. It takes time for the lift to reach the target incline shown on the display.

Ramp changes occur only when the foot pedals are in motion. The number that appears on the display indicates the selected CrossRamp setting, not the degree of incline. There is not a one-to-one relationship between the degree of incline and the CrossRamp setting. Refer to Table 2. It provides an approximation of the relationship between the CrossRamp setting and the degree of incline.

Table 2. Relationship between CrossRamp setting and degree of incline

CrossRamp Setting	Degree of Incline
1	13°
6	20°
11	27°
16	34°
20	40°

The CrossRamp setting affects the column height in the program profile. Refer to Diagram 12.

The CrossRamp has an auto-leveling feature and returns to the number 1 setting each time you return to the Precor banner or turn the EFX off, and then on. To adjust the level so the CrossRamp automatically returns to a higher CrossRamp setting, refer to Changing EFX Settings.

QUICKSTART: Press QUICKSTART to start your workout immediately using the Manual Program. Refer to Choosing QUICKSTART.

RESISTANCE: Press and hold the RESISTANCE arrow keys to increase or decrease the resistance in from 1 to 20.

Right Selection Key: Every time you press this key the display reflects your cumulative strides, your strides per minute, or your vertical gain. An LED lights and indicates which information is being displayed.

Owner’s Manual: Display Console 25