21.When you no longer need the information in the error log, press QUICKSTART for at least four seconds to erase it. The message, NO ERRORS, appears on the display and remains static to let you know when the error log has been cleared.
Important: You cannot retrieve the error log once you have cleared it. You may want to resolve any issues you are experiencing with the EFX before clearing the error log.
22.When you are ready, press OK to cycle back to the ODOMETER, or press RESET to return to the Precor banner.
Troubleshooting Error Codes
If any error codes appear in the center display, turn the unit Off and On. If the error continues to occur, call an authorized service person for assistance. Refer to Obtaining Service.
If ERROR 30 appears on the display, you have an incorrect RJ45 cable connection. Remove the cable and
For example:
Tab location
Owner’s Manual: Advanced Programming and Troubleshooting | 64 |
