Informational Displays
The EFX provides information about its use (odometer and hour meter), as well as software version, usage log, and error codes. In general, you would only access this information if directed to do so by Precor Customer Support.
These instructions guide you through all eight informational displays. Pressing the OK key moves you through the displays. Pressing the navigational arrow keys cycles you through the menu selection. To exit, press RESET at any time.
Viewing the Odometer
1.At the Precor banner, press the following keys in sequence and without pause:
RESET, 6, 5
The numbers 6, 5 appear on the display as you press the associated key.
Then DIAGS - INFORMATION DISPLAY scrolls across the display followed by ODOMETER.
2.Press OK to view the odometer value (cumulative strides traveled) or press the ▼ arrow key to move to the next informational display.
3.When you are ready, press OK to move to the next display (hour meter).
Owner’s Manual: Advanced Programming and Troubleshooting | 61 |
