Advanced Programming and Troubleshooting

Certain features remain hidden and can only be accessed using special key presses. Read this section if you want to:

Set the pause or cool-down times

Set the maximum speed limit

View the odometer

Display the number of hours you have used your treadmill

View the software versions and part numbers

Display the serial number

Check the usage log

Check the error log

Advanced Programming Tips

Always start at the Precor banner.

The advanced programming and diagnostic mode is accessed by pressing the red STOP button at the Precor banner. Any remaining key presses must occur quickly and without pause.

The QUICKSTART key is disabled while in programming mode.

The number keypad is disabled once you enter advanced programming mode. You need to use the navigational arrow keys to change the blinking prompts.

Some keys provide the same functionality and can be used interchangeably while in advanced programming mode. These keys are:

OK and ENTER

PAUSE/RESET and the red STOP button

The advanced programming prompts appear sequentially and in a menu format. Pressing the arrow keys in the navigational keypad moves you through the programs. Press OK to choose or accept the displayed selection. To return to the Precor banner without saving any changes, press PAUSE/RESET or the red STOP button.

Owner’s Manual: Advanced Programming and Troubleshooting

62

Page 64
Image 64
Precor 9.35 manual Advanced Programming and Troubleshooting, Advanced Programming Tips