Printronix PSA3 manual Selecting Characters, Control-code Character Printing, Mechanical Control

Chapter 3 Configuring The KSSM Emulation With Control Codes

FUNCTION	ASCII CODE	PAGE
Selecting Characters
Define Pattern for Special Printing
Effect	ESC ( X n1 n2 a1 a2 a3	40
Master Select	ESC ! n	47
Select 10 CPI	ESC P	51
Select 12 CPI	ESC M	51
Select 15 CPI	ESC g	51
Select an International Character
Set	ESC R n	54
Select Bold Font	ESC E	56
Cancel Bold Font	ESC F	56
Select Character Style	ESC q n	56
Select Character Table	ESC t n	57
Select Condensed Printing	SI	57
Select Condensed Printing	ESC SI	58
Cancel Condensed Printing	DC2	58
Select Double-strike Printing	ESC G	59
Cancel Double-strike Printing	ESC H	59
Select Double-width Printing
(One Line)	SO	60
Cancel Double-width Printing
(One Line)	ESC SO	60
Cancel Double-width Printing
(One Line)	DC4	60
Select Italic Font	ESC 4	63
Cancel Italic Font	ESC 5	63
Select Print Quality	ESC x n	63
Select Superscript/Subscript
Printing	ESC S n	64
Cancel Superscript/Subscript
Printing	ESC T	65
Set Intercharacter Space	ESC SP n	69
Turn Double-height Printing On/Off	ESC w n	76
Turn Double-width Printing On/Off	ESC W n	77
Turn Proportional Mode On/Off	ESC p n	79
Turn Underline On/Off	ESC - n	79
Control-code Character Printing
Enable Printing of Upper Control
Codes	ESC 6	42
Enable Upper Control Codes	ESC 7	43
Mechanical Control
Beeper	BEL	39

32