Printronix P7000 H-Series, PSA3 manual Select Double-width Printing in Dbcs Mode One Line

Select Double-width Printing in DBCS Mode (One

Select Double-width Printing in DBCS Mode (One Line)

ASCII Code	FS SO
Hex Code	1C 0E
Dec Code	28 14
Purpose	Doubles the width of all characters, spaces, and intercharacter
	spacing (set with the FS S or FS T commands) on the same
	line as the command.
Comment	This command is cancelled when the printer receives the
	following commands: LF, FF, VT, DC4, FS W 0, and CR.
	This command can be cancelled by FS W 0 and FS !
	This command works under ASCII mode, and it works the
	same as the SO or ESC SO commands.
	The default is Normal (non double-width) printing.

Cancel Double-width Printing in DBCS Mode (One Line)

ASCII Code	FS DC4
Hex Code	28 14
Dec Code	1C 20
Purpose	Cancels double-width printing selected by the FS SO
	command.
Comment	This command does not cancel double-width printing selected
	by the FS W command.
	The default is Normal (non double-width) printing.

61