Printronix P7000 H-Series, PSA3 manual Set Absolute Horizontal Print Position, Set Bottom Margin

Set Absolute Horizontal Print Position

Set Absolute Horizontal Print Position

ASCII Code	ESC $ n1 n2
Hex Code	1B 24 n1 n2
Dec Code	27 36 n1 n2
Purpose	Moves the horizontal print position to the position specified by
	the following formula:
	Horizontal position = n1 + (n2 * 256) + left margin.
	Where:
	0 <= n1 <= 127
	0 <= n2 <= 255
	The unit setting for this command is 1/60 inch.
Comment	The printer ignores this command if the specified position is to
	the right of the right margin.

Set Bottom Margin

ASCII Code	ESC N n
Hex Code	1B 4E n
Dec Code	27 78 n
Purpose	Sets the bottom margin on continuous paper to n lines (in the
	current line spacing) from the top-of-form position on the next
	page.
	Where:
	1 <= n <= 127
	0 < n *(current line spacing) < page length
Comment	This was formerly called the “Set skip-over-perforation”
	command.
	This command affects the front panel setting of “Bottom
	Margin.”
	The default depends on the power-up configuration.

Cancel Bottom Margin

ASCII Code	ESC O
Hex Code	1B 4F
Dec Code	27 79
Purpose	Cancels the bottom margin settings.
Comment	This was formerly called the “Cancel skip-over-perforation”
	command.
	This command affects the front panel setting of “Bottom
	Margin.”

67