Printronix P7000 H-Series, PSA3 manual Master Select One-Line Attribute In Dbcs Mode

Master Select One-Line Attribute In DBCS Mode

Master Select One-Line Attribute In DBCS Mode

	ASCII Code		ASSC	0	!	n
	Hex Code		ASSC	30	21	n
	Dec Code		ASSC	48	33	n
	Purpose		Where:
			0 < = n < = 255
			Select any combination of several one-line attributes by setting
			or clearing the appropriate bit in the n parameter, as show in
			the table below.
Bit		On/Off		Hex			Dec	Function
2		Off		00			0	Cancel double width
		On		04			4	Select double width
3		Off		00			0	Cancel double height
		On		08			8	Select double height
	Comment		These attributes are canceled when the printer receives the
			following commands: LF, FF, VT, and CR.

This command takes effect only in DBCS mode.

Pair Two Characters in Vertical Printing

ASCII Code	FS D d1 d2
Hex Code	1C 44 d1 d2
Dec Code	28 68 d1 d2
Purpose	Aligns two rotated characters to fit the space occupied by a
	normal size rotated character where d1 is the lower character
	and d2 is the upper character. Both d1 and d2 can be SBCS
	characters or DBCS characters. If the character is a DBCS
	character, it will automatically be half-width.
Comment	This command has an effect only in vertical printing mode.
	Only two characters are combined at a time.

49