Select DBCS Print Quality
Select DBCS Print Quality
ASCII Code | FS x n |
Hex Code | 1C 78 n |
Dec Code | 28 120 n |
Purpose | Selects different print quality according to the following values: |
| n = 0 or 48LQ |
| n = 1 or |
| n = 2 or 50Near LQ |
| n = 3 or 51Super |
| n = 4 or 52Normal |
| n = 5 or 53Ultra |
| Where: |
| n = 0, 1, 2, 3, 4, 5, 48, 49, 50, 51, 52, 53 |
Comment | This command affects the front panel selection of “Typeface.” |
| This command only works in DBCS mode. |
| The default mode is according to the setting of front panel. |
Select Double-strike Printing
ASCII Code | ESC G |
Hex Code | 1B 47 |
Dec Code | 27 71 |
Purpose | Prints each dot twice, with the second slightly below and right to |
| the first, creating a bolder character. |
Comment | The default is Normal (non |
Cancel Double-strike Printing
ASCII Code | ESC H |
Hex Code | 1B 48 |
Dec Code | 27 72 |
Purpose | Cancels |
| command. |
Comment | The default is Normal (non |
59