Record TV Programme (continued)

About timer recording

Use the timer recording to automatically start and stop a recording at a later date/ time. This recorder tunes to the right programme channel and begins recording at the specified time.

With this recorder, you can schedule up to 40 recordings at a time and up to 6 (six) hours for each recording. During timer recording, changing the recorder’s channel is not possible.

Note: If the scheduled timer recording is longer than 6 (six) hours, it splits into two or more titles.

There are two ways to program a timer recording

Using the ShowView

Using manual timer programming

PAUSE LIVE TV

OK

TIMER (SHOWVIEW)

Timer recording (ShowView system)

This is a simple timer programming system. To use it, enter the ShowView programme number associated with your television programme. You can find this number in your TV listings magazine.

A Turn on the TV to the correct viewing channel for the recorder.

B Press TIMER (SHOWVIEW) on the remote control.

The timer menu appears.

List of timers

Timer details

Start time

Stop time

Date

Source

Channel

Title name

Repeat

VPS/PDC

Recording target

New Timer

ShowView

C Press the Blue button on the remote control for { ShowView }

The ShowView entry menu appears.

ShowView System

Enter ShowView program number :

English

Clear

Store

Cancel

About ‘VPS/PDC’

‘VPS’ (Video Programming System) or ‘PDC’ (Programme Delivery Control) is used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends later than was scheduled, this recorder will then turn on and off at the correct time.

D Use the alphanumeric keypad 0-9 to enter the ShowView programme number (e.g. 5-312-4 or 5,312 4, key in ‘53124’).

To clear the programme number, press the Red button for { Clear }.

To cancel the programme and exit the menu, press the Yellow button for

{Cancel }.

41

Page 41
Image 41
PYLE Audio DVDR5520H user manual About timer recording, Timer recording ShowView system