3–Interactive Commands
Statistics Menu (Command Line Options -gs and -ls)
SN0054614-00 K 3-91
LogToFile (LF): null.csv
5. To restore the adapter defaults, select Restore Default, and then press
ENTER
. The following message appears:
Resetting to default settings..., done.
6. To change the polling, select Auto Poll, and then press
ENTER
. Then select
either Auto Poll or Manual Poll, and then press
ENTER
to enable that
selection.
7. To change the sampling rate, select Set Rate, and then press
ENTER
. You
are prompted to enter a rate value between 5 and 30 seconds; the current
rate is shown in parentheses. Type a new rate, and then press
ENTER
to
update the sampling rate.
8. To save the adapter statistics to a file, select Log to File, and then press
ENTER
. Type the name of a.csv file to save to, and then press
ENTER
.
Table3-11 shows the values for the adapter port statistics options.
Current Settings
13: Statistics 1: HBA Statistics 1: Configuration 1: Current Settings
The system shows the current settings for:
AutoPoll (AP)
SetRate (SR)
LogToFile (LF)
Restore Defaults
13: Statistics 1: HBA Statistics 1: Configuration 2: Restore Default
The system restores the default settings and returns a message:
Table 3-11. Adapter Port Statistics Options
Parameter
Name Alias Value Description
AutoPoll AP 0Turn on automatic updates of the adapter
port statistics.
1–256 Turn on automatic updates of the adapter
port statistics at a specified interval.
SetRate SR 5–30 Set the polling interval during automatic
update (seconds).
LogToFile LF Log File
Name
Export the statistics to a file (CSV format).