Q-Logic FC, FC0E -fg , -fs

4–Non-Interactive Commands
Command Summary
4-16 SN0054614-00 K
Network Interface Statistics Commands
To show the FCoE network interface statistics, issue the following command:
# scli -fcoe ( <hba instance> | <hba wwpn> ) --mon --nsl --portn
FCoE Log Commands
To show the FCoE available logs, issue the following commands:
To list available log IDs:
# scli -fcoe ( <hba instance> | <hba wwpn> ) --log --list
To show a specific log by log ID:
# scli -fcoe ( <hba instance> | <hba wwpn> ) --log --id
<logid>
In the previous commands, the variables indicate the following:
-fg
(Show Driver Settings)
To show the driver settings, type:
#scli -fg (<hba instance> | <hba wwpn>) (view | ?)
Where:
-fs
(Configure Driver Settings)
Type the following command to configure the driver settings:
#scli -fs (<hba instance> | <hba wwpn>) {(<param name> |
<param alias>) <param value>}
hba instance =Adapter instance number of an adapter port
hba wwpn =World wide port name of an adapter port
firmware file =File name of the new firmware (usually .bin)
portn =FCoE access port 0 or 1
logid =Available log ID (0–n)
NOTE:
The -fg option is valid only in non-interactive mode.
hba instance =Adapter number (use -g command to find)
hba wwpn =World wide port name of the adapter