4–Non-Interactive Commands
Command Summary
SN0054614-00 K 4-11
#scli -dm (<hba instance> | <hba wwpn> | all)details | det
Where:
-e

(Boot Device View | Select | Disable)

Use the -e command to:
Show the current boot-device selection for all adapters.
Show the current boot-device selection for a specific adapter.
Set a target device as the boot device for an adapter.
Selectable boot—The OS boots from the first target the BIOS finds.
Delete the boot device from an adapter.
In these commands:
To view the current boot device selection on all adapters:
#scli -e (view | ?)
To view the current boot device selection for a specific adapter:
#scli -e (<hba instance> | <hba wwpn>) (view | ?)
In Solaris SPARC, if the system is running with a csh or tsch shell, include double
quotes around the question mark (?). For example:
#scli -e <hba> "?"
In Windows and Linux, each adapter’s currently selected boot device is shown in
the following format:
<hba instance> <hba wwpn> <target wwnn> <target wwpn> <lun id>
Solaris shows each adapter’s currently selected boot device in the following
format:
hba instance =Adapter number (use -g command to find)
hba wwpn =World wide port name of the adapter
all =All adapters in the system
hba instance =Adapter number (use -g command to find)
hba wwpn =World wide port name of the adapter
target wwnn =World wide node name of the target
target wwpn =World wide port name of the target
target id =ID to which the target is bound
lun id =ID of the LUN