Q-Logic FC, FC0E - page 315

D–Help Commands
SN0054614-00 K D-3
–d <file name > Performs a driver update to the adapters.
<file name> is the full path of the driver
file in inf/zip or exe format.
–dm ( <hba instance> | <hba wwpn> |
<all> ) general | gen | details
| det
Runs a transceiver (SFF/SFP) diagnostics
on an adapter port and shows the result in
general or detail view. This feature is sup-
ported only with 4Gb adapter or latest. This
feature is not available with inbox driver
(SLES 10.0 / RHEL 5.0 or latest).
–e ( <hba instance> | <hba wwpn> )
( enable | 0 0 0 )
Selectable Boot: Configure the operating
system to boot from the first target the
BIOS finds.
–e ( <hba instance> | <hba wwpn> )
( enable | 0 0 0 )
Selectable Boot: Configure the operating
system to boot from the first target the
BIOS finds.
–e ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current boot device information
on an adapter port.
–e ( <hba instance> | <hba wwpn> )
( view | ? )
Shows the current boot device information
on an adapter port.
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
Clears the selected current boot device set-
tings on an adapter port
(prim/alt1/alt2 or alt3 Boot Port
Name). Configures all LUNs of all devices
attached to an adapter port (Disable).
–e ( <hba instance> | <hba wwpn> )
disable [ prim | alt1 | alt2 |
alt3 ]
Clears the selected current boot device set-
tings on an adapter port
(prim/alt1/alt2 or alt3 Boot Port
Name).
–e ( <hba instance> | <hba wwpn>
<target wwnn> <target wwpn>
<lun id> [ prim | alt1 | alt2 |
alt3]
Configures the operating system to boot
from a specific target:
prim: Primary Boot Port Name
alt1: Alternate 1 Boot Port Name
alt2: Alternate 2 Boot Port Name
alt3: Alternate 3 Boot Port Name
Table D-2. Help Commands (Continued)
Command
Line Action Arguments Function