THE AUTOSET CS2 SYSTEM
AUTOSET CS2 COMPONENTS
The AUTOSET CS2 flow generator is supplied with air tubing and a power cord.
Masks are supplied separately, as you and your clinician have to decide which mask is best for you. Masks that can be used with AUTOSET CS2 are listed on page 10.
Some people experience dryness of the nose, mouth and throat while using the
AUTOSET CS2 system, especially during winter. Others may experience sneezing and/ or a runny or blocked nose during the first few weeks of AUTOSET CS2 treatment. In many cases, these symptoms of nasal irritation can be resolved with a humidifier. See page 14 to connect a humidifier to the AUTOSET CS2.
LCD screen
ENGLISH
Control panel
Removable front cover
Carry handle
Pressure sensor tube connector
Air tubing connector
Figure 1: AutoSet CS2 flow generator
The control panel allows you to adjust settings on the flow generator, and the LCD screen displays information about your treatment. See “Control Panel Functions” on page 22.
ResLink attachment point
Air filter
Power cord
Figure 2: Rear of AutoSet CS2
The AUTOSET CS2 can run on AC or DC power. See page 11 to see how to connect the power cords and use the locking device. See page 17 to connect a RESLINK™. See page 36 to replace the air filter.
THE AUTOSET CS2 SYSTEM
9
