HUMIDAIRE
You will need a Medium size (52cm) air tube to connect the AUTOSET CS2 unit to the HUMIDAIRE™ (see Figure 7).
1Make sure both the HUMIDAIRE and the AUTOSET CS2 are turned off.
Fill the HUMIDAIRE with water as described in the humidifier manual. Place the filled water chamber inside the HUMIDAIRE.
2Gently detach enough of the tube clips to release the end of the pressure sensor tube from the AUTOSET CS2 air tubing.
Connect the AUTOSET CS2 air tubing to the left connector port on the humidifier, and the medium (52cm) air tubing to the right connector port. Close the HUMIDAIRE lid.
ENGLISH
| Medium air tubing |
HumidAire |
|
AutoSet CS2 air tubing | Pressure sensor tube |
|
3Place the AUTOSET CS2 on top of the HUMIDAIRE. Do not place the AUTOSET CS2 unit underneath the humidifier. (This is to avoid water spilling into the unit.)
THE AUTOSET CS2 SYSTEM
15
