ResMed AutoSet CS 2 user manual Servicing

WARNING

! Do not wash the air filter once it has become soiled. The air filter is not washable or reusable.

FITTING THE FILTER

• Remove the filter cover at the back of the flow generator.

• Remove and discard the old air filter.

• Insert a new filter, the blue tinted side facing towards you.

NOTE Match the cut corner of the filter with the shape of the casing.

•Replace the air filter cover. The blue tinted side of the filter should be facing out.

HYPOALLERGENIC AIR FILTER

The ResMed hypo-allergenic filter is a standard filter to which an electrostatic filter has been bonded to capture very small particles. The filter is intended for those users of ResMed flow generators who will benefit from enhanced filtering of the air delivered during treatment.

Inspect the air filter every month and check if it is blocked by dirt or contains holes.

The filter should be replaced every three months, or more often if the flow generator is operating in a dusty environment.

Fit as described above.

SERVICING

This product (AUTOSET CS2) should be inspected by an authorised ResMed Service Centre 5 years from the date of manufacture. Prior to this, the device is intended to provide safe and reliable operation provided that it is operated and maintained in accordance with the instructions provided by ResMed. Applicable ResMed warranty details are provided with the device at the time of original supply. Of course, as with all electrical devices, if any irregularity becomes apparent, you should exercise caution and have the device inspected by an Authorised ResMed Service Centre.

ENGLISH

CLEANING AND MAINTENANCE

37