ResMed AutoSet CS 2 user manual Periodically, Air Filter, Air filter cover

CAUTION

! • Do not use bleach, chlorine-, alcohol- or aromatic-based solutions (including all scented oils), moisturising or antibacterial soaps to clean the cushion, mask, air tubing or the AUTOSET CS2. These solutions may cause hardening and reduce the life of the product.

• Do not wash or dry the mask frame at a temperature above 80oC (176oF). Exposure to higher temperatures may reduce the life of the product.

• Do not hang the air tubing and pressure sensor tube in direct sunlight as the tubing may harden over time and eventually crack.

PERIODICALLY

1.The mask and air tubing are subject to normal wear and tear. Inspect them regularly for damage.

2.Open the power cord locking clip and remove the cord. Clean the exterior of the flow generator with a damp cloth and mild detergent.

3.Inspect the air filter to check if it is blocked by dirt or contains holes. See full instructions below.

WARNING

! Beware of electric shock. Do not immerse the flow generator or power cord in water. Always unplug the flow generator before cleaning and be sure that it is dry before reconnecting.

CAUTION

! Do not attempt to open the AUTOSET CS2. There are no user serviceable parts inside. Repairs and internal servicing should only be performed by an authorised service agent.

AIR FILTER

Inspect the air filter every month and check if it is blocked by dirt or contains holes.

Air filter cover

The filter should be replaced every 6 months, or more often if the flow generator is operating in a dusty environment.

36