3Attach the mask to the air tubing.
The mask system should already be assembled. If it is not, please refer to the user instructions supplied with the mask.
Connect the mask system to the free end of the air tubing.
ENGLISH
Proximal cuff
Figure 6: Assembling the AutoSet CS2 system
HUMIDIFIERS
A humidifier may be required if you are experiencing dryness of the nose, throat or mouth. The following ResMed humidifiers are compatible with the AUTOSET CS2:
HUMIDAIRE™ | HUMIDAIRE 2i™ | HUMIDAIRE 2iC™ |
heated humidifier | heated humidifier | passover humidifier |
HUMIDIFIER ACCESSORY (HUMIDAIRE ONLY)
Medium air tubing (52cm)
Figure 7: Humidifiers compatible with the AutoSet CS2
When using a humidifier, stop the AUTOSET CS2 by using the Start/Stop key or by removing the mask to trigger the SMARTSTOP function. Do not switch the AUTOSET CS2 off at the power switch or the power source while it is running, as this could result in condensation in the motor.
THE AUTOSET CS2 SYSTEM
13
