GUIDANCE AND MANUFACTURER’S DECLARATION — ELECTROMAGNETIC EMISSIONS AND IMMUNITY
Guidance and manufacturer’s declaration – electromagnetic emissions
The AutoSet CS2 is intended for use in the electromagnetic environment specified below. The customer or the user of the AutoSet CS2 should assure that it is used in such an environment.
Emissions test | Compliance | Electromagnetic environment - | |
guidance | |||
|
| ||
|
|
| |
RF emissions CISPR11 | Group 1 | The AutoSet CS2 uses RF energy only for | |
|
| its internal function. Therefore, its RF | |
|
| emissions are very low and are not likely | |
|
| to cause any interference in nearby | |
|
| electronic equipment. | |
|
|
| |
RF emissions CISPR 11 | Class B | The AutoSet CS2 is suitable for use in all | |
|
| establishments, including domestic | |
|
| ||
Harmonic Emissions | Class A | establishments and those directly | |
IEC |
| connected to the public | |
|
| network that supplies buildings used for | |
|
| ||
Voltage Fluctuations/Flicker | Complies | domestic purposes. | |
Emissions IEC |
|
| |
|
|
|
Medical Electrical Equipment needs special precautions regarding EMC and needs to be installed and put into service according to EMC information provided in this document.
Warnings: The AutoSet CS2 should not be used adjacent to or stacked with other equipment.
If adjacent or stacked use is necessary, the AutoSet CS2 should be observed to verify normal operation in the configuration in which it will be used.
The use of accessories (eg Humidifiers) other than those specified in this manual is not recommended. They may result in increased emissions or immunity of the AutoSet CS2.
ENGLISH
TECHNICAL SPECIFICATIONS
47