4Connect the free end of the medium air tubing to the AUTOSET CS2.
Connect the pressure sensor tube by twisting the Luer lock onto the AUTOSET CS2 (see page 12).
5Connect the mask system to the free end of the long air tubing. The final assembly should look like this:
6Switch on the HUMIDAIRE and the AUTOSET CS2.
WARNING
! Make sure that the power cords and plugs are in good condition and the equipment is not damaged.
7Perform the Air Circuit Learn function (see page 26).
For information about filling and maintaining your humidifier, refer to the HumidAire User’s Manual.
The AUTOSET CS2 is now ready for use with the HUMIDAIRE. See “Starting Treatment” on page 21.
16
