Ricoh 3260C, Aficio 3260C -Orderof Copy Output, Sub-machine, Main machine, 2.Sub-machine, 1.Main machine, Using Batch mode, Placing originals on the exposure glass

Using Connect Copy

❒When the number of originals or copies is small, copying will be done on only the main ma- chine.

F Press the {Start} key on the main machine.

Copying starts on the main machine after the originals are scanned.

Copying starts on the sub-machine when data transfer from the main machine is completed.

Placing originals on the exposure glass

A Place the next original when the machine has finished scanning the first one. Press the {Start} key.

B When all the pages have been scanned, press the {#} key.

Note

❒If the machine is not in use, it will begin copying.

Using Batch mode

A Place the originals and press the {Start} key.

B After the first set of originals has been fed, place the next set.

Note

❒The next set of originals must be set while the Auto Feed indicator is lit.

❒To stop scanning or copying, press the {Clear/Stop} key on the main machine, and then follow the instructions on the display.

Reference

p.15 “Batch”

C Collect your copies from both the main and sub machines.

Note

❒The number of copies might differ on the main and sub machines.

❒Both machines may not fin- ish copying at the same time.

❒When using the Sort/Staple function, copying is divided between the two machines by the number of sets. If a pa-

per misfeed occurs when processing a set of copes, it is 4 not possible for the other machine to take over the remainder of that particular

set.

-Order of Copy Output

❖When copying with the Sort/Staple function

(Example) Copying 6 sets of a three-page original

AFU034S

1.Main machine

2.Sub-machine

Copies are delivered face-down on both the main and sub machines. When using the Sort/Staple func- tion, the processing of one copy set cannot be divided between the two machines.

107