Copier Functions

C Make sure [Size Magnificatn] is high- lighted.D Enter the length of the original using the number keys, and then press [#].

Note

You can enter sizes within the following ranges:

Metric

1–999 mm

version

(increments of 1 mm)

 

 

Inch

0.1"–99.9"

version

(increments of 0.1")

 

 

E Enter the length of the copy using the number keys, and then press [#].

Note

To change the length after press- ing [#], select [Original] or [Copy], and then enter the length.

F Press [OK] twice.

G Place the originals, and then press the {Start} key.

Directional Magnification (%)

Copies can be reduced or enlarged at different reproduction ratios, horizontally and vertically.

CP2P01EE

a:Horizontal ratio

b:Vertical ratio

Note

You can also select a preset ratio close to the ratio using [Reduce] or [Enlarge], and then adjust it further, using [n] or [o].

A Press [Reduce / Enlarge].

2

B Press [Specifd. Ratio].

C Press [Direct. Mag.%].

To enter the ratio using the number keys

APress [Horizontal].BEnter the ratio using the number keys, and then press [#].CPress [Vertical].DEnter the ratio using the number keys, and then press [#].

EPress [OK].

To specify a ratio using [n] and

[o]

APress [With no].BPress [Horizontal].CAdjust the ratio using [n] or[o].

Note

Pressing [n] or [o] changes the ratio in increments of 1%. Pressing and holding down [n] or [o] changes it in in- crements of 10%.

41