Supplementary Information

Copying Book Originals

The machine sets the reproduction ratio automatically to meet paper size and copies originals together onto the paper.

The machine uses ratios in the range of 25 to 400%.

If the calculated ratio is under the available minimum, it will be adjusted to minimum ratio. However, with some ratios, parts of the image might not be copied.

Even if the direction of originals is different from that of the copy paper, the machine will automatically rotate the image by 90°to make copies properly.

If you mix originals of different sizes or place originals in different orien- tations, you cannot use this function.

Four originals are copied onto each sheet of copy paper with this function. If the number of originals scanned is less than a multiple of 4, the last page will be blank.

Copying to make a magazine may take some time after scanning originals.

If the Finisher MEC BK (saddle stitch) is installed and you select "Maga- zine" and "Staple (Saddle Stitch)", copies are stacked, stapled at the centre, folded in half automatically, and then delivered.

Depending on the paper type, the folding position may very slightly.

Repeat

7

Depending on the paper size, ratio, and orientation, parts of repeated images

may not be copied.

If you use this function with "Custom Size Original", you can copy repeatedly the image in the area you want by specifying the vertical and horizontal lengths from the base point. In this case, place your original on the exposure glass.

1.Base point2.Horizontal length3.Vertical length

171