Copying

B Set the erase border width using [n] and [o].

Note

To change the value entered, press [n] and [o] to set the new value.

 

 

 

2

 

Selecting [Diff. Width]

 

 

 

 

APress [Diff. Width].

B Press the key for the border you want to change, and then set the erase border width using [n] and [o].

E Press [2 Sided Setting], and then press [Back Side].

Note

If you do not need to erase the border on the back of the origi- nal, proceed to step G.

F Set the erase border width for the back of the original.G Press [OK] three times.H Place the originals, and then press the {Start} key.
Centre erase

A Press [Edit / Colour Creation].

B Press [Erase / Margin Adj.].

C Press [Erase Centre / Border].

D Press [Centre].E Set the erase centre width using [n] and [o].F Press [2 Sided Setting], and then press [Back Side].

Note

If you do not need to erase the centre on the back of the origi- nal, proceed to step H.

G Set the erase centre width for the back of the original.

Note

Erasing the centre of the back of the original is valid only when you are copying 2-sided origi- nals.

H Press [OK] three times.

I Place the originals, and then press the {Start} key.

70