Copier Functions

Centre/border erase

 

Selecting [Diff. Width]

A Press [Edit / Colour Creation].

 

A Press [Diff. Width].

2

B Press [Erase / Margin Adj.]. C Press [Erase Centre / Border]. D Press [Centre / Border].

E Set the centre and border to be erased.

Selecting [Same Width]

APress [Same Width].

B Press [Centre], and then set the erase centre width using [n] and [o].C Press [Border], and then set the erase border width using [n] and [o].

B Press the key for the part you want to change, and then set the erase margin width using [n] and [o].

F Press [2 Sided Setting], and then press [Back Side].

Note

If you do not need to erase the border or centre on the back of the original, proceed to step H.

G Set the erase border or centre width for the back of the original.

Note

Erasing the centre or border of the back of the original is valid only when you are copying 2- sided originals.

H Press [OK] three times.

I Place the originals, and then press the {Start} key.

71