Using Connect Copy

Copying Stored Documents Using Connect Copy

You can print a document stored in the Document Server using Connect Copy.

Note

❒The main machine is the one on which the document is stored.

A Press the {Document Server} key. B Select the document to be printed.

The selected document is high- lighted.

Reference

“Document Server”, General

Settings Guide

C Repeat step if you want to select more documents.

The documents will be printed in the order that they have been se- lected.

Note

❒To change the printing order, press the highlighted docu- ments to cancel your selection. Select again in the desired or- der.

❒You can also cancel all your se- lections by pressing the {Clear Modes} key.

D If you need to change the print settings, press [Print Settings].

Note

❒If you do not need to change any settings, proceed to step E.

❒If you are selecting multiple files, you can check the file names and printing order by pressing [T] and [U] to scroll through the list.

❒Press [Select File] to return to the Select Files to Print display.

E Press [].

The key is highlighted and the two machines are connected.

F Enter the required number of cop-

4

 

ies using the number keys.

 

Note

❒The maximum copy quantity that can be set is 999.

❒If you have entered a wrong value, press the {Clear/Stop} key and enter again.

❒When using the Sort function, you can check the print results by making a sample copy on the main machine. The sub-ma- chine cannot be used to make sample copies.

G Press the {Start} key.

Note

❒The main machine begins making copies from the document stored in the Document Server. Copying on the sub-machine starts when the document is transferred from the main machine.

❒To stop the printing, press the {Clear/Stop} key on the main machine, and then follow the in- structions on the display.

❒The number of copies might differ on the main and sub machines.

❒Both machines may not finish copying at the same time.

109