User Tools (Copier / Document Server Features)

❖Stamp Setting

You can have the text printed on the first page or all pages.

Note

❒Default: All Pages

❖Size

You can select the size of the stamp printed in Stamp Text mode.

Note

❒Default: Auto

❖Superimpose

You can have page numbers print- ed as a negative where they over- lap black parts of the image.

Note

❒Default: No

6 ❖ Stamp Colour

You can set the selected priority colour when printing the text.

Note

❒Default: Black

Input / Output P.1/2

❖Switch to Batch (SADF)

You can select to have the Batch or SADF function displayed when you press [Special Original]. See p.15 “Batch”.

Note

❒Default: Batch

❖SADF Auto Reset

In SADF mode, an original must be set within a specific time after the previous original has been fed. You can adjust this time from 3 sec- onds to 99 in 1 second increments.

Note

❒Default: 5 seconds

❖Rotate Sort: Auto Paper Continue

You can continue copying when paper of the required orientation has run out during rotate-sorting. See p.43 “Rotate Sort”.

Note

❒If you select [No] :

•When paper of the required orientation runs out, the ma- chine stops copying and prompts you to supply copy paper. When you load paper, the machine will continue copying.

❒If you select [Yes] :

•Copying continues using copy paper of a different orienta- tion. The copy job will finish even if the machine is left un- attended.

❒Default: No

❖Auto Sort

You can specify whether the Sort function is to be selected when the machine is turned on, or when the functions are cleared.

Note

❒Default: No

❖Memory Full Auto Scan Restart

If memory becomes full while scanning originals, the machine will copy the scanned originals first, and then automatically pro- ceed scanning remaining originals. You can enable or disable this function.

Note

❒If you select [No] :

•When memory becomes full, the machine stops operation, allowing you to remove the copies on the output tray.

154