Ricoh 3260C, Aficio 3260C Copy Face Up, Job Preset, Note, [Exit], Face Up, Reference, [New Job], [Printing], Preparation, [Reserved Job], Editing Job Preset, A Press {Face Up} key

Basic Procedure

Copy Face Up

Use this function to reverse the order of copies.

Preparation

Before using this function, register "Face up" as a copy function key. See p.144 “Copy Function Key: F1- F5”.

A Press {Face Up} key.B Place originals, and then press the {Start} key.

Job Preset

You can make settings for the next copy job while copying is in progress.

If a long copy job is in progress and you do not want to wait for it to fin- ish, you can use this function to make settings for the next copy job in ad- vance. When the current copy job fin- ishes, the next job begins automatically.

Reference

See “Job List”, General Settings Guide.

A Press [New Job] when "Copying..." is displayed.

2

B Make settings for the next copy job.C Place the originals in the ADF, and then press the {Start} key.

All originals are scanned.

After the current copy job, the next job starts automatically.

Note

❒Each job stored is allocated a job number that is displayed on the Reserved Job screen.

❒To switch the display to the cur- rent copy job press [Reserved Job], followed by [Printing], and then [Exit].

Editing Job Preset

You can check and change the contents of preset jobs. You also can delete preset jobs.

A Press [Reserved Job].

B Select the number of the job you want to check or change.

21