Ricoh 3260C, Aficio 3260C Placing Originals on the, Exposure Glass, Placing Originals in the Auto Document Feeder, Note, Note, Note, Important, 1Reference, 1. Sensors, 2.Left scale

Placing Originals

Placing Originals on the

Exposure Glass

1 Reference

For related default settings, see p.156 “Eject Copy Face Up / Down in Glass Mode”.

A Lift the ADF.

Important

❒Do not lift the ADF forcefully. Otherwise, the ADF cover might open or be damaged.

Note

❒Be sure to lift the ADF more than 30°. Otherwise, the size of the original might not be detect- ed correctly.

B Place the original face down on the exposure glass. It should be aligned with the left scale.

Placing Originals in the Auto Document Feeder

Settings should be made accordingly in the following situations:

❖When placing originals consisting of more than 100 pages:

p.15 “Batch”

❖When placing originals one by one: p.15 “SADF”

❖When placing originals of the same width but different sizes:

p.16 “Placing originals of mixed sizes”

❖When placing custom size originals: p.17 “Placing custom size origi- nals”

Note

❒Do not stack originals above the limit mark on the side guide of the ADF.

❒The last page should be on the bottom.

❒When you copy two-sided origi- nals, both front and back sides of each original are scanned at once.

❒Do not place objects on the sensors or cover them with your hands, or the original size may not be detect- ed properly.

ZGMH012E

1. Positioning mark2.Left scale

Note

❒ Start with the first page to be copied.

C Lower the ADF.

ADB028S

1. Sensors

14