Settings You Can Change with User Tools

❒[With Image Rotation] Use to copy when using the Auto Tray Switching function.

❒[Off] When a paper tray runs out of paper, copying is interrupted and the message “Load pa- per.” is displayed.

ZGVX020E

1.Original2.Paper (Tray 1)3.Paper (Tray 2)4.Paper (Tray 3)

❒[Without Image Rotation] Only copies with Auto Tray Switch- ing if you load paper of the same size and in the same orien- tation in two or more trays. If the paper is not the same size or in the same orientation, copying is interrupted and the message “Load paper.” is displayed.

ZGVX030E

1.Original

2.Paper (Tray 1)

3.Paper (Tray 2)

4.Paper (Tray 3)

General Features P.2/6

❖Duplex Mode Priority

You can select the type of the Du- plex function effective when the power is turned on, or modes are cleared.

Note

❒Default: 1 Sided→1 Sided

❖Copy Orientation in Duplex Mode

You can set the copy orientation when making two-sided copies.

Note

❒Default: Top to Top

❖Original Orientation in Duplex Mode

You can set the original orientation when making two-sided copies.

Note

❒Default: Top to Top

❖Change Initial Mode

You can select standard mode or Program No.10 as the mode effec- tive when power is turned on, or modes are cleared.

Note

❒Default: Standard

❖Max. Copy Quantity

The maximum copy quantity can be set between 1 and 999.

Note

❒Default: 999 Sheets

❖Tone: Original Remains

The beeper (key tone) sounds if you forget to remove originals af- ter copying.

6

143