Copying

-How to operate

To stop the machine during a multi- copy run

Press the {Clear/Stop} key.

2

To return the machine to the initial

 

 

condition after copying

 

 

Press the {Clear Modes} key.

When clearing entered values

Press the {Clear/Stop} key or [Clear] on the display.

To check the settings

Press the {Check Modes} key.

Interrupt Copy

Use this function to interrupt a long copy job to make urgently needed copies.

A Press the {Interrupt} key.

The Interrupt indicator lights.

E When the display prompts you to do so, place the former set of originals again.

F Press the {Start} key.

Note

The previous copy job's set- tings are restored and the machine continues copying from where it left off.

When the machine continues copying

A Place the originals you want to copy.

B Press the {Start} key.

The machine stops the previous job and starts copying the new originals.

C When copying is complete, remove originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator goes out.

The previous copy job's settings are restored and the machine continues copying from where it left off.

AFU027S

When scanning is interrupted

A Remove the originals that were being copied, and then place the originals you want to copy.

B Press the {Start} key.

Copying starts.

C When copying is complete, remove the originals and copies.

D Press the {Interrupt} key again.

The Interrupt indicator turns off.

Left Original Beeper

The beeper sounds and an error message is displayed if you leave originals on the exposure glass after copying.

Note

See p.143 “Tone: Original Re- mains”.

20