
Printing received faxes on both sides of paper
By using the Duplex button on your machine, you can set the machine to print received faxes on both sides of paper.
1Press Duplex.
2Press the Scroll buttons until the binding option you want appears.
•Off: Prints in Normal mode.
•
•
3Press OK to save your selection.
If the mode is enabled, the Duplex button is backlit.
Sending a fax to multiple destinations
You can use the Multiple Send feature, which allows you to send a fax to multiple locations. Originals are automatically stored in memory and sent to a remote station. After transmission, the originals are automatically erased from memory.
1Press Fax.
2Load originals face up into the ADF, or place a single original face down on the scanner glass.
For details about loading an original, see page 5.1.
3Adjust the document resolution and darkness to suit your fax needs. See page 9.1.
4Press Menu until Fax Feature appears on the bottom line of the display and press OK.
5Press the Scroll buttons until Multi Send appears and press OK.
6Enter the number of the first receiving fax machine and press OK.
You can use speed buttons, speed dial numbers, or group dial numbers. For details, see page 10.3.
7Enter the second fax number and press OK.
The display asks you to enter another fax number to send the document.
8To enter more fax numbers, press OK when Yes appears and repeat steps 6 and 7. You can add up to 209 destinations.
Note
You cannot use group dial numbers for another fax number.
9When you have finished entering fax numbers, select No at the Another No.? prompt and press OK or Start.
The original is scanned into memory before transmission. The display shows memory capacity and the number of pages being stored in memory.
10If an original is placed on the scanner glass, select Yes to add another pages. Load another original and press OK.
When you have finished, select No at the Another Page? prompt.
The machine begins sending the fax to the numbers you entered in the order in which you entered them.
9.6 <Faxing>