You can also search through memory for an entry by pressing Address Book. See page 10.4.

Group dial numbers

If you frequently send the same document to several destinations, you can group these destinations and set them under a group dial number. You can then use a group dial number to send a document to all of the destinations within the group. You can set up to 200 (0 through 199) group dial numbers using the destination’s existing speed dial numbers.

Registering a group dial number

1Press Fax.

2Press Address Book until New&Edit appears on the bottom line of the display and press OK.

3Press the Scroll buttons until Group Dial appears and press OK.

4Enter a group dial number between 0 and 199 and press OK.

5Enter a speed dial number and press OK.

6Press OK when Yes appears.

7Repeat steps 5 and 6 to include other speed dial numbers into the group.

8When you have finished, press the Scroll buttons to select No at the Another No.? prompt and press OK.

9Press Stop/Clear to return to Standby mode.

Editing a group dial number

You can delete a specific entry from a group or add a new number to the selected group.

1Press Address Book until New&Edit appears on the bottom line of the display and press OK.

2Press the Scroll buttons until Group Dial appears and press OK.

3Enter the group dial number you want to edit and press OK.

4Enter the speed dial number you want to add or delete and press OK.

If you entered a new speed dial number, Add? appears.

If you enter a speed dial number stored in the group, Delete? appears.

5Press OK to add or delete the number.

6Press OK when Yes appears to add or delete more numbers and repeat from step 4.

7When you have finished, press the Scroll buttons to select No at the Another No.? prompt and press OK.

8Press Stop/Clear to return to Standby mode.

Using group dial numbers

To use a group dial entry, you need to search for and select it from memory.

When you are prompted to enter a fax number while sending a fax, press Address Book. See below.

Searching Phone Book for an entry

There are two ways to search for a number in memory. You can either scan from A to Z sequentially, or you can search by entering the first letters of the name associated with the number.

Searching sequentially through the memory

1If necessary, press Fax.

2Press Address Book until Search&Dial appears on the bottom line of the display and press OK.

3Press the Scroll buttons until the number category you want appears and press OK.

4Press OK when All appears.

5Press the Scroll buttons until the name and number you want appears. You can search upwards or downwards through the entire memory in alphabetical order.

Searching with a particular first letter

1If necessary, press Fax.

2Press Address Book until Search&Dial appears on the bottom line of the display and press OK.

3Press the Scroll buttons until the number category you want appears and press OK.

4Press the Scroll buttons until ID appears and press OK.

5Enter the first few letters of the name you want and press OK.

6Press the Scroll buttons until the name you want appears and press OK.

Deleting a Phone Book entry

You can delete entries in Phone Book one by one.

1Press Address Book until Delete appears on the bottom line of the display and press OK.

2Press the Scroll buttons until the number category you want appears and press OK.

3Press the Scroll buttons until the searching method you want appears and press OK.

Select Search All to search for an entry by scanning through all entries in Phone Book.

10.4 <Fax setup>