Roberts Gorden HE40ST, HE20ST, HE50DL, HE45UT, HE30DL, HE50ST Maintain Clearance Side Clearance below

Attach this information to a wall near the ROBERTS GORDON® heater.

®

I n f r a r e d H e a t i n g

Read the Installation, Operation, and Service Manual thoroughly before installation, operation, or service.

Know your model number and installed configuration.

Model number and installed configuration are found on the burner and in the Installation, Operation and Service Manual.

Write the largest clearance dimensions with permanent ink according to your model number and configuration in the open spaces below.

OPERATING INSTRUCTIONS WARNING

1.STOP! Read all safety instructions on this information sheet.

2.Open the manual gas valve in the heater supply line.

3.Turn on electric power to the heater.

4. Set the thermostat to desired setting.

		TO TURN OFF THE HEATER
1. Set the thermostat to off or the lowest setting.
							Fire Hazard
IF THE HEATER WILL NOT OPERATE, TO ENSURE YOUR SAFETY,						Keep all flammable objects, liquids and vapors the minimum
FOLLOW THESE INSTRUCTIONS TO SHUT DOWN YOUR HEATER
						required clearances to combustibles away from heater.
						Some objects will catch fire or explode when placed close to
1.	Set the thermostat to off or the lowest setting.
2.	Turn off electric power to the heater.					heater.
3. Turn off the manual gas valve in the heater supply line.
4. Call your registered installer/contractor qualified in the						Failure to follow these instructions can result in death, injury
	installation and service of gas-fired heating equipment.
						or property damage.
	Maintain					clearance
			to	the side			and
					clearance below
		the heater from vehicles
	and combustible materials.
Roberts-Gordon LLC			Roberts-Gordon Europe Limited			Service Telephone: +44 (0)121 506 7709
1250 William Street			Unit A, Kings Hill Business Park			Service Fax: +44 (0)121 506 7702
P.O. Box 44			Darlaston Road, Wednesbury			E-mail: uksales@rg-inc.com
			West Midlands WS10 7SH UK			E-mail: export@rg-inc.com
Buffalo, NY 14240-0044 USA
			Telephone: +44 (0)121 506 7700
Telephone: 716.852.4400
			Fax: +44 (0)121 506 7701
Fax: 716.852.0854
Toll Free: 800.828.7450

Installation Code and Annual Inspections:

All installation and service of ROBERTS GORDON® equipment must be performed by a contractor qualified in the installation and service of equipment sold and supplied by Roberts-Gordon and conform to all requirements set forth in the ROBERTS GORDON® manuals and all applicable governmental authorities pertaining to the installation, service and operation of the equipment. To help facilitate optimum performance and safety, Roberts-Gordon recommends that a qualified contractor conduct, at a minimum, annual inspections of your ROBERTS GORDON® equipment and perform service where necessary, using only replacement parts sold and supplied by Roberts-Gordon.

Further Information: Applications, engineering and detailed guidance on systems design, installation and equipment performance is available through ROBERTS GORDON® representatives. Please contact us for any further information you may require, including the Installation, Operation and Service Manual.

This product is not for residential use.

© 2009 Roberts-Gordon LLC	All rights reserved. No part of this work covered by the copyrights herein may be reproduced or copied in any form or by any means – graphic, electronic, or mechanical, including photocopying,
	recording, taping, or information storage and retrieval systems – without written permission of Roberts-Gordon LLC.
www.rg-inc.com	Printed in U.S.A.	P/N 91037912 Rev. H