[Example]
Selecting Variation 8, instrument 3 (Piano
3w) on an SC-8850:
1.Set the MIDI transmit channel to match that of the Part or module you wish to control.
2.Press MIDI/SELECT [3] (the LED will light).
3.Press the black G#4 key (“H”) [9].
4.Press the “8” key in the NUMERIC ENTRY section [12].
5.Press ENTER [14].
6.Press the black F#4 key (“L”) [9].
7.Press the “0” key in the NUMERIC ENTRY section [12].
Note: “L” corresponds to CC32. This Bank Select message is sometimes used for selecting other sound module modes. If so, several “L” values are supported. See the module’s manual for details.
8.Press ENTER [14].
9.Press the black A#4 key (“Program Change”) [10].
10.Press the “3” key in the NUMERIC ENTRY section [12].
11.Press ENTER [14].
12.Press MIDI/SELECT [3] again (the LED will go out).
Selecting Drum Sets on a GS sound module
The Drum Part (MIDI channel 10) of a GS module does not respond to Bank Select messages. However, if you try to send only a Program Change message from the
followed by the Program Number in order to make sure you obtain the Drum Set you need.
Note: “L” corresponds to CC32. This Bank Select message is sometimes used for selecting other sound module modes. If so, several “L” values are supported. See the module’s manual for details.
[Procedure]
1.Set the MIDI transmit channel to 10. See page 11.
2.Press MIDI/SELECT [3] (the LED will light).
3.Press the black G#4 key (“H”) [9].
4.Press the “0” key (C#5) in the NUMER- IC ENTRY section [12].
Note: Press the [CANCEL] key [13] to erase these values and start again.
5.Press ENTER [14].
6.Press the black F#4 key (“L”) [9].
7.Press the “0” key (C#5) in the NUMER- IC ENTRY section [12].
8.Press ENTER [14].
9.Press the black A#4 key (“Program Change”) [10].
10.Select the program number by press- ing the appropriate keys in the NUMERIC ENTRY section [12].
Example: to select the PC #49 Drum Set (ORCHESTRA Set) on an
11.Press ENTER [14].
12.Press MIDI/SELECT [3] again (the LED will go out).
12
