Roland VS-1680 owner manual Expand, Shift, Threshold

Editing an automix

fig.4-04.e fig.4-25.e

Shift

	0 M1	M8
		Time
	Expand
Check marks	Specify the ratio (0.5–2.0) by which the automix data values
	will be increased or decreased relative to the “Threshold.”

NOTE

Even if there is only one marker for the automix data that you wish to increase or decrease, press the button in the order of [F1 (In)] → [F1 (Out)] at the same marker location.

MEMO

You can rotate the TIME/VALUE dial to modify the automix setting value at the cursor location. If you wish to re-select

the automix data that will be edited, press [ ].

9.Press [F5 (Exp)].

10.Use [][][ ][ ] to move the cursor. Operate the TIME/VALUE dial to set the parameters.

fig.4-24

Target

This will indicate the type of automix data whose data will be increased or decreased, as you selected in step 6. If you wish to shift or expand the values of all automix data, use the TIME/VALUE dial to select “All Level and Pan.”

Shift

Specify the actual amount (-50–50) by which the automix data values will be increased or decreased.

Threshold

When using Expand to increase or decrease the automix data values by a specified proportion, this specifies the center value.

fig.4-26.e

Expand

Threshold

0 M1M8 Time

11.To execute the Shift/Expand operation, press [F4 (Exec)]. If you press [F6 (EXIT)], you will return to step 7 without executing the Shift/Expand operation.

12.A message will ask you to confirm. Press [YES]. If you press [NO], you will return to step 11 without executing the Shift/Expand operation.

fig.4-27_80

13.When the Shift/Expand operation has been completed, the display will indicate “Complete.” Press

[PLAY (DISPLAY)].

24