Roland VS-1680 owner manual Copying mixer settings, F4 Exec or Enter YES, F6 Exit or Exit no

Enhancements related to operation

Copying mixer settings

You can copy mixer settings (equalizer, level) from another channel to the channel currently shown in the Channel Edit page.

The following settings can be copied.

Equalizer

EQ low freq.

EQ low gain

EQ mid freq.

EQ mid gain

EQ mid Q

EQ high freq.

EQ high gain

Level

ATT

Phase

EFX1 insert send level

EFX1 insert return level

EFX2 insert send level

EFX2 insert return level

EFX3 insert send level

EFX3 insert return level

EFX4 insert send level

EFX4 insert return level

Fader

MASTER send pan

EFX1 send level

EFX1 send pan

EFX2 send level

EFX2 send pan

EFX3/AUX1 send level

EFX3/AUX1 send pan

EFX4/AUX2 send level

EFX4/AUX2 send pan

AUX/AUX3 send level

AUX/AUX3 send pan

1.Press [CH EDIT (SELECT)] for the copy-destination channel.

2.Press [PAGE] so that [F5] indicates “Copy,” and then press [F5 (Copy)].

fig.6-28

3.Use the TIME/VALUE dial to select the copy-source channel.

fig.6-29

NOTE

If the Channel Link setting is OFF for the copy-destination channel, the Channel Link setting of the copy-source channel will be considered as OFF even though it may actually be ON, and only the settings of individual channels will be copied. Similarly, when Channel Link is ON for the copy-destination channel, Channel Link of the copy-source channel will be considered to be ON even though it may actually be OFF, and the settings of both channels will be copied.

4.Use the function buttons to select the settings that will be copied.

[F1 (CpyEQ]: Copy only the equalizer settings.

[F2 (CpyLv]: Copy only the level settings.

[F4 (Exec] or [ENTER (YES)]:

Copy both the equalizer and level settings.

[F6 (EXIT] or [EXIT (NO)]:

Exit the window without copying.

5.When the data has been copied, the display will indicate “Complete.” Press [PLAY (DISPLAY)].

37