Connecting the Computers
Connect each computer to the Vista Remote 2 using the appropriate CPU adapter cable designed to interface to the type of computer being connected (PS/2, Unix, SUN, DEC, Apple, etc). Connect the DB25M end of the CPU adapter cable to the desired DB25F CPU port on the rear panel of the unit. Connect the other end of the cable to the corresponding ports on the computer (keyboard, monitor, and mouse). Refer to Figure 3.
CPU adapter
Remote computer cable(s) connections
Figure 3. Connecting Computers
Connecting to the network
Connect a network cable from the RJ45 connector on the rear panel of the Vista Remote 2 and to your network (See Figure 4)
Network connection
Figure 4. Connecting to the Network
Vista Remote 2 Installation and Operations Manual | 7 | |
|
|
|
