Rose electronic MAN-VR2 manual Configure miscellaneous, Scan time

Configure miscellaneous

This menu allows you to change the maximum computer ports and scan time.

Figure 23. Configure Misc

Maximum ports:

The “Maximum ports” configuration allows you to change the total number of computer ports that are in use. If your using an 8-port switch and only connecting 6 CPUs, changing the maximum ports from 8 to 6 will skip computer ports 7 and 8 during the scan function. To change the “Maximum Ports”, highlight the maximum ports and press <Enter> to clear the field. Type in the new value (1-8) and press <Enter>.

Scan time:

This item sets the pause time during the scan function.

To change the “Scan time”, highlight the scan time and press <Enter> to clear the field. Type in the new value (1-16 seconds) and press <Enter>.

Vista Remote 2 Installation and Operations Manual 31