commands to instruct the KVM Switch module to exercise an option must be configured to either the “Command, Keyboard Control” tab or the Hosts tab.
The easiest way to switch to a CPU port is invoke the Computer select window. To do this connect using the VNC viewer, press and release the Ctrl key, then within 2 seconds, press the Esc key. The computer select window will display as shown below, listing the computers connected to the Vista Remote 2.
Using the up or down arrow keys, select the computer port to switch to and press enter. You will be immediately switched to that CPU port and the connected computer’s video will display. You will have complete control (if your security profile permits it) of that computer. All functions can be performed as if you were directly connected to that computer. Files can be opened, edited, and saved, and applications installed on that computer can be executed.
38
