Test Button
The Test button is used to test the frame mapping configuration you create. Once you have tested your frame map configuration, press the Apply button to implement the modifications you make. The message below appears if the frame map is deemed valid.
FIGURE 45. Frame Mapping Table Valid message
Done Button
The Done button is used to close the Frame Mapping window.
Select Frame Window
The Select Frame window, shown in Figure 46, is used to select a Frame (IP Address and MAC Address) to include in the Frame Mapping table for your Tribus Intercom System.
FIGURE 46. Select Frame Window
IP Address 1 Column
The IP Address 1 column displays the IP Address of the active master controller in the ADAM frame.
32
