RTS ADAM manual Figures

List

of

Figures

FIGURE 1.	4 Frame System with Full Redundancy, including failover Master Controller	7
FIGURE 2.	Partially Redundant system, including failover Master Controller	8
FIGURE 3.	4 Frame System with No Redundancy, including failover Master Controller	9
FIGURE 4.	Eight Frame Tribus System – Non-Redundant	11
FIGURE 5.	Upload Debug Information	13
FIGURE 6.	Upload Debug Information window	14
FIGURE 7.	Uploading Debug Information Status window	14
FIGURE 8.	Navigation to the Debug Folder for AZedit	15
FIGURE 9.	Tribus Backcard Slots	17
FIGURE 10.	Base 8 Port Numbering System Example	24
FIGURE 11.	Base 8 Port Numbering scheme with both AIO-16 and an AIO-8 card
	installed	25
FIGURE 12.	Base 16 Port Numbering System Example	26
FIGURE 13.	Force Autonomous Mode when no audio links up – Intercom ConfigurationOptions Tab	27
FIGURE 14.	Connect To Frame Menu	28
FIGURE 15.	Frame Mapping Table	29
FIGURE 16.	Frame Mapping Table Browse Button which opens the Select Frame window. ................................30
FIGURE 17.	Apply Button message	31
FIGURE 18.	Frame Mapping Table Valid message	32
FIGURE 19.	Select Frame Window	32
FIGURE 20.	TBX Links Status Window	34
FIGURE 21.	Intercom Alarm Indication	36
FIGURE 22.	Intercom Alarms Window	37
FIGURE 23.	Log Viewer Window	39
FIGURE 24.	Configure Logging Window	39
FIGURE 25.	I/O Card Version Information Window	41
FIGURE 26.	Download Device Firmware Window	42
FIGURE 27.	Download in Progress Window	42
FIGURE 28.	Successful Download Message	43