Debug Information

The Debug Information menu item, shown in Figure 32, allows you to send a flash file to RTS to help troubleshoot the reason for crash in AZedit. In the event of a processor crash, the processor saves diagnostic information about the cause of the problem to its flash memory. The menu item stays greyed-out until a flash file is created when the processor crashes.

NOTE: Every card in every frames stores its own debug information. So, if frame 3 has a processor crash, you must connect AZedit to frame three to create a .azd file to send to RTS for debugging.

FIGURE 32. Upload Debug Information

To create the debug file, do the following:

NOTE: Once the processor has crashed the Upload Debug Information menu item becomes active.

13

Page 17
Image 17
RTS ADAM manual Debug Information