Runco DTV-947 manual On ALL Sources, TOUCH-UP on ALL Sources, Align on ALL Sources

EYE-QTMAutoconvergence

ON ALL SOURCES

The “On all sources” functions as the “On current source.”	It	EYE-Q
		TOUCH UP
includes also three options:
		QUICK AUTOPICTURE
		AUTOCONVERGENCE
		FULL AUTOPICTURE
		EYE-Q SETUP
		EYE-Q DIAGNOSTICS
Touch-up
		Select with or
		then <ENTER>.
Align		<EXIT> to return

Align from mid-position

The difference is that the convergences will be carried out on all sources of the projector, i.e. all available memory banks of the pro- jector. The total number of sources is displayed between the brack- ets.

AUTOCONVERGENCE
ON CURRENT SOURCE:
ALIGN
ALIGN FROM MIDPOSITION
ON ALL SOURCES: (XX)
TOUCH-UP
ALIGN
ALIGN FROM MIDPOSITION
STATUS:
ready
Select with	or
then <ENTER>.
<EXIT> to return

TOUCH-UP ON ALL SOURCES

When TOUCH-UP below ON ALL SOURCES by pushing up or down keys of the control disc;

Press the <ENTER> button to start up the static convergence.

The process will repeat for as many times as the total number of the sources until all sources are perfectly aligned.

If the process will repeat for as many times as the total number of the sources until all sources are perfectly aligned.

If the process is successfully completed, the projector will return to image display of the current source.

EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with	or
then <ENTER>.		AUTOCONVERGENCE
<EXIT> to return
		ON CURRENT SOURCE:
		ALIGN
		ALIGN FROM MIDPOSITION
		ON ALL SOURCES: (XX)
		TOUCH-UP
		ALIGN
		ALIGN FROM MIDPOSITION
		STATUS:
		ready/forced exit/forced break
		Select with	or
		then <ENTER>.
		<EXIT> to return

ALIGN ON ALL SOURCES

When ALIGN is selected, the automatic convergence on all sources will be carried out automatically, starting from the existing settings.

By projecting alternately red and blue lines, 25 convergence areas are aligned to the green pattern. The process will repeat for as many times as the total number of the sources until all sources are perfectly aligned.

Follow the steps below to select:

Highlight ALIGN below ON ALL SOURCES by pushing up or down keys of the control disc;

Press the <ENTER> button to start up the automatic convergence of the entire screen.

If the process is successfully completed, the projector will return to image display of the current source.

EYE-Q
TOUCH UP
AUTOCONVERGENCE
QUICK AUTOPICTURE
FULL AUTOPICTURE
EYE-Q SETUP
EYE-Q DIAGNOSTICS
Select with	or
then <ENTER>.
<EXIT> to return

AUTOCONVERGENCE

ON CURRENT SOURCE:

ALIGN

ALIGN FROM MIDPOSITION

ON ALL SOURCES: (XX)

TOUCH-UP

ALIGN

ALIGN FROM MIDPOSITION

STATUS:

ready

Select with or then <ENTER>.

<EXIT> to return

Use this option when the convergence is close to proper alignment.

10-12