EYE-QTMAutoconvergence

CENTERING THE CAMERA

The camera must be centered in middle of the projection screen. Follow the steps described below:

Highlight CENTER CAMERA by pushing the up or down keys of the control disc.

Press the <ENTER> button to start up the process.

Note: It is critical that the green raster of the presently selected source is centered on the CRT faceplate. Otherwise, the camera will not be centered properly.

EYE-Q

TOUCH UP

AUTOCONVERGENCE

QUICK AUTOPICTURE

FULL AUTOPICTURE

EYE-Q SETUP

EYE-Q DIAGNOSTICS

EYE-Q SETUP

FOCUS THE LENS

CENTER THE CAMERA

CONFIGURATION: rear/front

LEARN REFERENCE

TOUCH-UP OPTIONS:

Select with or then <ENTER>.

<EXIT> to return

CENTERING THE CAMERA HORIZONTALLY

One vertically centered green bar will be projected onto the screen, together with a text box. Inside the box, the text of “CAMERA ALIGNMENT HORIZONTAL” indicates the item subject to adjustment and a symmetrical bar scale (from -50 to +50) under text.

If the indicated value below the bar scale is not equal to zero (i.e. the black highlight is not in the middle of the bar scale), the cam- era is not centered horizontally. Follow the steps below to center the camera horizontally:

Turn the knob situated on the upper-right corner of the camera clockwise or counter clockwise until the highlight is in the middle of the bar scale (i.e. the indicated value becomes zero);

Press the <ENTER> button to continue with the camera vertical centering.

Note: An easy way to remember the H+V adjustments is: The knob located up/down from the fixed screw is vertical adjustment. The knob located left/right from the fixed screw is horizon- tal adjustment.

CAMERA

ALIGNMENT

HORIZONTAL

+00

Fixed screw

No Adjustment

S

8

m

N

 

E

 

m

L

 

 

V

 

 

T

 

 

T

 

m

V

 

 

 

m

L

 

8

 

 

ENS

 

 

Knob for centering

Knob for centering

the camera vertically

the camera horizontally

10-6

Page 56
Image 56
Runco DTV-947 manual Centering the Camera Horizontally