VX-40d/-50d/-60d/ -80d Specifications | Runco VX-50d, VX-80d, VX-60d

7. Specifications

Table 7-1lists the VX-40d/-50d/-60d/-80d specifications.

Table 7-1. VX-40d/-50d/-60d/-80d Specifications

Projector Type:	Digital Light Processing (DLP), 3-chip, 16:9 SuperOnyx DMD

Native Resolution:	VX-40d/-50d:1280 x 720 (16:9)
	VX-60d/-80d (788p): 1400 x 788 (16:9)
	VX-60d/-80d (1050p): 1400 x 1050 (4:3)

Aspect Ratios:	Refer to Table 7-2

Video Standards:	Refer to Table 7-2

DTV Compatibility:	480p, 720p, 1080i

Scan Frequency:	Horizontal: 15 kHz to 120 kHz
	Vertical: 23.97 Hz to 150 Hz

Picture Size (16:9 Screen):	VX-40d/-60d:
	Recommended width = 72 to 192 in.
	Maximum width = 300 in.
	VX-50d:
	Recommended width = 72 to 240 in.
	Maximum width = 350 in.
	VX-80d:
	Recommended width = 72 to 288 in.
	Maximum width = 375 in.

Throw Distance	VX-40d/-50d:Refer to Table 3-3
(Factor x Screen Width):	VX-60d/-80d:Refer to Table 3-4

Horizontal and Vertical	VX-40d/-50d/VX-60d/-80d with Telesto A Lens: None
Offset:	VX-40d/-50d with Telesto B, C, D or E Lens:
	Horizontal: 25% of screen width left or right
	Vertical: 65% of screen height up or down
	VX-60d/-80d with Telesto B, C, D or E Lens:
	Horizontal: 25% of screen width left or right
	Vertical: 50% of screen height up or down

Lamp:	VX-40d/-60d:1,000 Watt Xenon lamp module
	VX-50d/-80d:1,200 Watt Xenon lamp module

Estimated Lamp Life:	1,000 hours

Inputs:	(1) RGBHV, 5xBNC (from DHD Controller)
	(1) DVI with HDCP (from DHD Controller)
	(1) RS-232 (from DHD Controller)
	(1) RS-422
	(1) Composite Video
	(1) Component Video
	(1) S-Video

Controls:	- Built-in keypad
	- IR remote
	- Serial commands via RS-232 (from DHD Controller)

7.1 VX-40d/-50d/-60d/ -80d Specifications

Runco VX-40d/-50d/-60d/-80d Owner’s Operating Manual

89

Image 101

Runco VX-50d, VX-80d, VX-60d manual VX-40d/-50d/-60d/ -80d Specifications, VX-40d/-50d/-60d/-80d Specifications

Contents

VX-40d / VX-50d VX-60d / VX-80d Page For Projectors, Video Processors and Controllers TWO Year Limited Warranty Effective Warranty Date Runco INTERNATIONAL, INC Safety Precautions Table of Contents Install Projector Stand CineWide with AutoScope, Floor-Mount Specifications Maintenance and TroubleshootingOperation Serial Communications Table of Contents List of Figures Xii About This Manual Certain features Using This ManualSignificance. They also provide supplemental information Degrade performance or cause a malfunction Description, Features and Benefits Runco Optional Accessories VX-40d/-50d/-60d/-80d Top/Rear/Front View VX-40d/-50d/-60d/ -80d at a Glance VX-40d/-50d/-60d/ -80d Input Panel Rear Foot Stationary Power Input 100 to 240 VAC RS232 OUT Not used RS422 Not used Gpio Not used RS232Input 3 Video / Input 4 S-Video Input 2 DVI Focus VX-40d/-50d/-60d/ -80d Rear-Panel KeypadZoom VX-40d/-50d/-60d/-80d has its own internal menu system Input 1 BNC Menu Navigation ButtonsHelp Exit DHD Controller Front Panel DHD Controller Front Panel Outputs DHD Controller Rear Panel Component Video RCA connectors HD1 / HD2 Analog BNC connectorsInputs 3. DVI 1 / DVI 2 Digital Video 1 / S-VIDEO DHD Controller Remote Control Cursor Buttons On / OFFFor more information about aspect ratios, refer to Table Video Aspect Ratio Selection Buttons Memory Preset Buttons ISF NT NightANA Anamorphic 4X3 Standard 43 Controls and Functions Installation Installation Overview Quick SetupInstallation specialist Step Procedure For Details, Refer to Projector Installation Options Installation ConsiderationsInstallation Type Ambient Light Throw Ratio Throw Distance Range VX-40d/-50d Lens Options and Throw RatiosLens Option Note Throw Dist Minimum Maximum Lens Option Note Throw Dist Screen Width Minimum Maximum VX-60d/-80d Lens Options and Throw Ratios Position Vertical and Horizontal Screen center are aligned with each other Horizontal Lens Shift Folded Optics Lens Assembly Front View Installing the Projection Lens Fixed CineWide Are both fully assembled Installing the Optional CineWide Lens MountAutoScope or Base Plate AutoScope stand used for floor-mounted projector Mounting VX-40d/-50d/-60d/ -80d Adjusting the ProjectionFloor Mounting Ceiling Mounting Connecting the DHD Controller to VX-40d/-50d/-60d/-80d Connector Panel Access Connecting Source 10. Digital DTV RGB or Component Video Connections Digital DTV RGB or Component Video Connections See Figure 11. Analog RGB Connections Analog Computer RGB Connections See Figure 12. Composite, S-Video and Component Video Connections Composite/S-Video/Component Video Connections See Figure RS-232 Controller Connecting 12-VoltConnection Trigger Outputs to Input voltage to the AutoScope lens motor must be between Connecting to AC Power Selecting the Input Source Turning on the PowerYou must enter a passcode to access the Service menu Focus Zoom Vertical and Horizontal Lens Shift Adjusting the Picture Orientation Primary Lens Adjustments Assembly to Lens Motor Installing and Adjusting the CineWide Anamorphic LensCarriage Plate CineWide With AutoScope or Base Horizontal Position X Adjustment Too Low Correct position Too High Geometry Wrong Position Correct Position Calibrating Projector Inputs Main TheaterMaster Remote 1. Power Button Control Functions Navigating the Projector Menus Are disabledChannel Setup 17. Copying a Channel You cannot use Auto Setup with a locked channel. Copy Auto Setup Native aspect ratio is with the primary lens only. With an 18. Resize Presets No Resizing Installation Recommended see below Adjust Pixel Tracking before Pixel PhaseValues shown represent where the approximate center On an internal grayscale test pattern Input Levels are not applicable to DVI InputExperienced technicians use the Input Levels submenu Uncheck this item before exiting this menu There must be at least two consecutive white pixels present Originally expected may no longer be possible Working With the Lamp Intensity value is not the actual lumen output, but rather a More easily maintained as the lamp ages Installation Operation Using the On-Screen Menus Service ISF PresetsInput Source Aspect Ratio Input Source Main MenuAspect Ratio HD Pass Thru 1 HD Pass Thru Remote Aspect Ratio Control Description Key Aspect Ratio Settings Picture Brightness Contrast Color Tint Sharpness Picture Typical Pluge Pattern for Adjusting Brightness Gray Yellow Cyan Green Magenta Red Blue Gray Yellow Cyan Green Magenta Red Blue Input Position Left/Right Up/Down Width Height Overscan ResolutionInput Position ISF Presets ISF Night ISF Day Custom Save Factory Default ISF PresetsInformation Serial Number Hardware Firmware 0002.003A Date Mar 15 Calibration You must enter a passcode to access the Calibration menu Operation Input Names Restore Composite Video Component SD Service Tip Auto ADC Bandwidth Auto YPbPr Input ResolutionHD/RGB 1 and HD/RGB 2 Color Space Select Auto, RGB or YUV Operation Removing the Lamp Door Lamp and Filter Replacement Removing the Lamp Lamp is accurate Recording the Serial Number of a New Lamp Removing the Primary Lens Lens Replacement Symptom Possible Causes Solution Troubleshooting TipsTroubleshooting Chart Power down the projector Code Description General VX-40d/-50d/-60d/-80d Error CodesError Codes Code Description Lamp Failures Power and Cooling Panel Driver and Formatter Code Description Tipm Image ProcessorBuilt-In Keypad Code Description Miscellaneous Serial Command Syntax RS-232 Connection and Port ConfigurationSerial Commands Command VIRTUAL235 YES Aspect Ratio Commands Image Preset Commands Output Shift Commands Value Description Min/max Stored? Input Position Commands Bkgnd Serial Communications VX-40d/-50d/-60d/-80d Specifications VX-40d/-50d/-60d/ -80d Specifications Industry-Standard Specifications Home Theater Calibration SpecificationsPower Requirements VX-40d/-60d VX-50d/-80d Weight without lens DimensionsLimited Warranty Specifications are subject to change without notice DHD Controller Specifications DHD Controller Specifications VX-40d/-50d/-60d/-80d Dimensions VX-40d/-50d/-60d/ -80d Dimensions Specifications Page Runco CL-810 Owner’s Operating Manual